{"id":6502,"date":"2026-07-31T13:06:44","date_gmt":"2026-07-31T05:06:44","guid":{"rendered":"https:\/\/broachingmach.com\/?p=6502"},"modified":"2026-11-20T09:01:07","modified_gmt":"2026-11-20T01:01:07","slug":"push-broaching-vs-pull-broaching","status":"publish","type":"post","link":"https:\/\/broachingmach.com\/en_ca\/push-broaching-vs-pull-broaching\/","title":{"rendered":"Push Broaching vs Pull Broaching: Differences, Applications and How to Choose"},"content":{"rendered":"<h2 class=\"wp-block-heading\" id=\"table-of-contents\"><span class=\"ez-toc-section\" id=\"Table_of_Contents\"><\/span>Table of Contents<span class=\"ez-toc-section-end\"><\/span><\/h2>\n\n\n\n<ul class=\"wp-block-list\"><li><a href=\"#push-broaching-vs-pull-broaching-at-a-glance\">Push Broaching vs Pull Broaching at a Glance<\/a><\/li><li><a href=\"#compression-vs-tension-the-core-mechanical-difference\">Compression vs Tension: The Core Mechanical Difference<\/a><\/li><li><a href=\"#how-push-broaching-works-under-compression\">How Push Broaching Works Under Compression<\/a><\/li><li><a href=\"#how-pull-broaching-works-under-tension\">How Pull Broaching Works Under Tension<\/a><\/li><li><a href=\"#machine-orientation-push-and-pull-vs-horizontal-and-vertical\">Machine Orientation: Push and Pull vs Horizontal and Vertical<\/a><\/li><li><a href=\"#accuracy-surface-finish-and-tooling-variables\">Accuracy, Surface Finish, and Tooling Variables<\/a><\/li><li><a href=\"#how-to-choose-between-push-and-pull-broaching\">How to Choose Between Push and Pull Broaching<\/a><\/li><li><a href=\"#information-needed-for-a-broaching-quote\">Information Needed for a Broaching Quote<\/a><\/li><li><a href=\"#frequently-asked-questions\">Frequently Asked Questions<\/a><\/li><li><a href=\"#need-help-selecting-the-process\">Need Help Selecting the Process?<\/a><\/li><\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Comparing <strong>push broaching vs pull broaching<\/strong> comes down to how the machine loads the cutting tool during the stroke. Push broaching drives a shorter broach through the workpiece under compression, which requires strict protection against column buckling. Pull broaching grips the front shank and draws a longer broach through the part under tension, supporting longer cutting strokes and multi-stage tooth sequences. Selecting the right method depends on feature geometry, length of cut, production volume, available machine stroke, and fixture support.<\/p><div id=\"ez-toc-container\" class=\"ez-toc-v2_0_90 counter-hierarchy ez-toc-counter ez-toc-grey ez-toc-container-direction\">\n<div class=\"ez-toc-title-container\">\n<div class=\"ez-toc-title\" style=\"cursor:inherit\">Table of Contents<\/div>\n<span class=\"ez-toc-title-toggle\"><a href=\"#\" class=\"ez-toc-pull-right ez-toc-btn ez-toc-btn-xs ez-toc-btn-default ez-toc-toggle\" aria-label=\"Toggle Table of Content\"><span class=\"ez-toc-js-icon-con\"><span class=\"\"><span class=\"eztoc-hide\" style=\"display:none;\">Toggle<\/span><span class=\"ez-toc-icon-toggle-span\"><svg style=\"fill: #999;color:#999\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" class=\"list-377408\" width=\"20px\" height=\"20px\" viewbox=\"0 0 24 24\" fill=\"none\"><path d=\"M6 6H4v2h2V6zm14 0H8v2h12V6zM4 11h2v2H4v-2zm16 0H8v2h12v-2zM4 16h2v2H4v-2zm16 0H8v2h12v-2z\" fill=\"currentColor\"><\/path><\/svg><svg style=\"fill: #999;color:#999\" class=\"arrow-unsorted-368013\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" width=\"10px\" height=\"10px\" viewbox=\"0 0 24 24\" version=\"1.2\" baseprofile=\"tiny\"><path d=\"M18.2 9.3l-6.2-6.3-6.2 6.3c-.2.2-.3.4-.3.7s.1.5.3.7c.2.2.4.3.7.3h11c.3 0 .5-.1.7-.3.2-.2.3-.5.3-.7s-.1-.5-.3-.7zM5.8 14.7l6.2 6.3 6.2-6.3c.2-.2.3-.5.3-.7s-.1-.5-.3-.7c-.2-.2-.4-.3-.7-.3h-11c-.3 0-.5.1-.7.3-.2.2-.3.5-.3.7s.1.5.3.7z\"\/><\/svg><\/span><\/span><\/span><\/a><\/span><\/div>\n<nav><ul class='ez-toc-list ez-toc-list-level-1 eztoc-toggle-hide-by-default' ><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-1\" href=\"https:\/\/broachingmach.com\/en_ca\/push-broaching-vs-pull-broaching\/#Table_of_Contents\" >Table of Contents<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-2\" href=\"https:\/\/broachingmach.com\/en_ca\/push-broaching-vs-pull-broaching\/#Push_Broaching_vs_Pull_Broaching_at_a_Glance\" >Push Broaching vs Pull Broaching at a Glance<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-3\" href=\"https:\/\/broachingmach.com\/en_ca\/push-broaching-vs-pull-broaching\/#Compression_vs_Tension_The_Core_Mechanical_Difference\" >Compression vs Tension: The Core Mechanical Difference<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-4\" href=\"https:\/\/broachingmach.com\/en_ca\/push-broaching-vs-pull-broaching\/#How_Push_Broaching_Works_Under_Compression\" >How Push Broaching Works Under Compression<\/a><ul class='ez-toc-list-level-3' ><li class='ez-toc-heading-level-3'><a class=\"ez-toc-link ez-toc-heading-5\" href=\"https:\/\/broachingmach.com\/en_ca\/push-broaching-vs-pull-broaching\/#Advantages_of_Push_Broaching\" >Advantages of Push Broaching<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-3'><a class=\"ez-toc-link ez-toc-heading-6\" href=\"https:\/\/broachingmach.com\/en_ca\/push-broaching-vs-pull-broaching\/#Limitations_of_Push_Broaching\" >Limitations of Push Broaching<\/a><\/li><\/ul><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-7\" href=\"https:\/\/broachingmach.com\/en_ca\/push-broaching-vs-pull-broaching\/#How_Pull_Broaching_Works_Under_Tension\" >How Pull Broaching Works Under Tension<\/a><ul class='ez-toc-list-level-3' ><li class='ez-toc-heading-level-3'><a class=\"ez-toc-link ez-toc-heading-8\" href=\"https:\/\/broachingmach.com\/en_ca\/push-broaching-vs-pull-broaching\/#Advantages_of_Pull_Broaching\" >Advantages of Pull Broaching<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-3'><a class=\"ez-toc-link ez-toc-heading-9\" href=\"https:\/\/broachingmach.com\/en_ca\/push-broaching-vs-pull-broaching\/#Limitations_of_Pull_Broaching\" >Limitations of Pull Broaching<\/a><\/li><\/ul><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-10\" href=\"https:\/\/broachingmach.com\/en_ca\/push-broaching-vs-pull-broaching\/#Machine_Orientation_Push_and_Pull_vs_Horizontal_and_Vertical\" >Machine Orientation: Push and Pull vs Horizontal and Vertical<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-11\" href=\"https:\/\/broachingmach.com\/en_ca\/push-broaching-vs-pull-broaching\/#Accuracy_Surface_Finish_and_Tooling_Variables\" >Accuracy, Surface Finish, and Tooling Variables<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-12\" href=\"https:\/\/broachingmach.com\/en_ca\/push-broaching-vs-pull-broaching\/#How_to_Choose_Between_Push_and_Pull_Broaching\" >How to Choose Between Push and Pull Broaching<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-13\" href=\"https:\/\/broachingmach.com\/en_ca\/push-broaching-vs-pull-broaching\/#Information_Needed_for_a_Broaching_Quote\" >Information Needed for a Broaching Quote<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-14\" href=\"https:\/\/broachingmach.com\/en_ca\/push-broaching-vs-pull-broaching\/#Frequently_Asked_Questions\" >Frequently Asked Questions<\/a><ul class='ez-toc-list-level-3' ><li class='ez-toc-heading-level-3'><a class=\"ez-toc-link ez-toc-heading-15\" href=\"https:\/\/broachingmach.com\/en_ca\/push-broaching-vs-pull-broaching\/#Can_push_or_pull_broaching_cut_a_blind_hole\" >Can push or pull broaching cut a blind hole?<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-3'><a class=\"ez-toc-link ez-toc-heading-16\" href=\"https:\/\/broachingmach.com\/en_ca\/push-broaching-vs-pull-broaching\/#Why_do_some_keyway_broaches_need_shims_while_others_finish_in_one_pass\" >Why do some keyway broaches need shims while others finish in one pass?<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-3'><a class=\"ez-toc-link ez-toc-heading-17\" href=\"https:\/\/broachingmach.com\/en_ca\/push-broaching-vs-pull-broaching\/#When_should_a_shop_upgrade_from_a_press_push_setup_to_a_pull_broaching_machine\" >When should a shop upgrade from a press push setup to a pull broaching machine?<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-3'><a class=\"ez-toc-link ez-toc-heading-18\" href=\"https:\/\/broachingmach.com\/en_ca\/push-broaching-vs-pull-broaching\/#What_details_are_needed_to_size_a_broaching_machine\" >What details are needed to size a broaching machine?<\/a><\/li><\/ul><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-19\" href=\"https:\/\/broachingmach.com\/en_ca\/push-broaching-vs-pull-broaching\/#Need_Help_Selecting_the_Process\" >Need Help Selecting the Process?<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-20\" href=\"https:\/\/broachingmach.com\/en_ca\/push-broaching-vs-pull-broaching\/#References\" >References<\/a><\/li><\/ul><\/nav><\/div>\n\n\n\n\n<blockquote class=\"wp-block-quote is-layout-flow wp-block-quote-is-layout-flow\"><p class=\"wp-block-paragraph\"><strong>Key takeaways<\/strong><\/p>\n<ul class=\"wp-block-list\"><li><strong>Load path:<\/strong> Push broaching places the tool in axial compression; pull broaching keeps the tool in axial tension.<\/li><li><strong>Tool length:<\/strong> Compressive loading limits push broaches to shorter, stiffer designs; tensile loading allows longer pull broaches with roughing, semi-finishing, and finishing teeth in one bar.<\/li><li><strong>Machine vs orientation:<\/strong> Push\/pull describes force direction, while horizontal\/vertical describes machine layout&mdash;vertical machines can be push-down, pull-up, or pull-down.<\/li><li><strong>Process stability:<\/strong> Both methods require proper alignment, controlled chip evacuation, and at least two teeth engaged in the cut to prevent drift or chatter.<\/li><\/ul>\n<\/blockquote>\n\n\n\n<p class=\"wp-block-paragraph\">Although both processes share the same fundamental cutting action&mdash;a multi-toothed tool whose successive teeth increase progressively in size&mdash;changing the force direction alters tool geometry, machine selection, cycle consistency, and process risk. This guide provides a structured engineering comparison to help manufacturing engineers and buyers choose the right approach.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"push-broaching-vs-pull-broaching-at-a-glance\"><span class=\"ez-toc-section\" id=\"Push_Broaching_vs_Pull_Broaching_at_a_Glance\"><\/span>Push Broaching vs Pull Broaching at a Glance<span class=\"ez-toc-section-end\"><\/span><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">The table below summarizes the practical engineering differences between the two linear broaching methods.<\/p>\n\n\n\n<figure class=\"wp-block-table is-style-stripes\"><table><thead><tr><th>Factor<\/th><th>Push broaching<\/th><th>Pull broaching<\/th><\/tr><\/thead><tbody><tr><td>Tool loading<\/td><td>Axial compression<\/td><td>Axial tension<\/td><\/tr><tr><td>Typical broach form<\/td><td>Shorter, thicker, higher column stiffness<\/td><td>Longer bar with front pull end and rear pilot<\/td><\/tr><tr><td>Primary structural risk<\/td><td>Buckling or bending if overloaded or misaligned<\/td><td>Tensile overload, pull-head wear, or alignment error<\/td><\/tr><tr><td>Typical equipment<\/td><td>Arbor press, hydraulic shop press, or vertical push-down machine<\/td><td>Dedicated horizontal or vertical pull-type broaching machine<\/td><\/tr><tr><td>Common applications<\/td><td>Short keyways, hole sizing, burnishing, repair, and low-to-medium volume<\/td><td>Deep splines, longer keyways, precision bores, and repeat production<\/td><\/tr><tr><td>Cut length capacity<\/td><td>Shorter strokes due to buckling limits<\/td><td>Longer cutting sections and multi-tooth stock removal<\/td><\/tr><tr><td>Tool handling<\/td><td>Driven from the rear; often manual on basic presses<\/td><td>Gripped by a pull head; supports automated tool retrieval<\/td><\/tr><tr><td>Typical machine capacity<\/td><td>Vertical push-down units commonly 2 to 25 tons<\/td><td>Vertical\/horizontal pull units commonly 2 to 75 tons<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">These ranges reflect standard industrial practice rather than rigid boundaries. Every application should still be verified against part drawing tolerances, required cutting force, material hardness, and fixture rigidity.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"compression-vs-tension-the-core-mechanical-difference\"><span class=\"ez-toc-section\" id=\"Compression_vs_Tension_The_Core_Mechanical_Difference\"><\/span>Compression vs Tension: The Core Mechanical Difference<span class=\"ez-toc-section-end\"><\/span><\/h2>\n\n\n\n<figure class=\"wp-block-image aligncenter size-large\"><img fetchpriority=\"high\" decoding=\"async\" width=\"1600\" height=\"900\" src=\"https:\/\/broachingmach.com\/wp-content\/uploads\/2026\/07\/push-vs-pull-force-diagram.png\" alt=\"Push broaching vs pull broaching force diagram showing compression versus tension\" class=\"wp-image-6500\" title=\"\" srcset=\"https:\/\/broachingmach.com\/wp-content\/uploads\/2026\/07\/push-vs-pull-force-diagram.png 1600w, https:\/\/broachingmach.com\/wp-content\/uploads\/2026\/07\/push-vs-pull-force-diagram-300x169.png 300w, https:\/\/broachingmach.com\/wp-content\/uploads\/2026\/07\/push-vs-pull-force-diagram-1024x576.png 1024w, https:\/\/broachingmach.com\/wp-content\/uploads\/2026\/07\/push-vs-pull-force-diagram-768x432.png 768w, https:\/\/broachingmach.com\/wp-content\/uploads\/2026\/07\/push-vs-pull-force-diagram-1536x864.png 1536w, https:\/\/broachingmach.com\/wp-content\/uploads\/2026\/07\/push-vs-pull-force-diagram-18x10.png 18w\" sizes=\"(max-width: 1600px) 100vw, 1600px\" \/><figcaption class=\"wp-element-caption\">Push broaching loads the broach column in compression, whereas pull broaching draws the tool through the part under tension.<\/figcaption><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">In push broaching, the press ram or machine slide pushes on the rear of the broach. Physically, the cutter behaves like a slender column under axial compression. As the unsupported length increases relative to the cross-section, the critical buckling load drops sharply. As noted in <em>American Machinist<\/em>&#39;s <em>Cutting Tool Applications<\/em> chapter on broaches, a push broach must remain relatively short because a column under excessive compressive load will buckle and break.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">In pull broaching, the machine inserts the front pilot through the starter hole, locks onto the pull end, and draws the broach through the stationary part. Because the cutting section is held in tension rather than compression, lateral deflection does not amplify into column buckling. According to MSC Industrial Supply&#39;s broaching technical guide, tensile loading lets pull broaches handle a longer length of cut without buckling, which is why they are preferred for deeper square, hexagon, and spline profiles.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Force direction does not change the basic chip-formation physics at each tooth edge. What it changes is how many teeth can be placed on a single bar, how much total stock can be removed in one pass, and how forgiving the setup is to length-to-diameter slenderness.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"how-push-broaching-works-under-compression\"><span class=\"ez-toc-section\" id=\"How_Push_Broaching_Works_Under_Compression\"><\/span>How Push Broaching Works Under Compression<span class=\"ez-toc-section-end\"><\/span><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">A standard push-broaching cycle follows five sequential steps:<\/p>\n\n\n\n<ol class=\"wp-block-list\"><li><strong>Part location:<\/strong> Seat the workpiece squarely on a rigid work rest or slotted guide bushing.<\/li><li><strong>Tool alignment:<\/strong> Align the push broach pilot with the pre-drilled or bored starter hole.<\/li><li><strong>Compressive stroke:<\/strong> Drive the ram downward to push the broach completely through the bore.<\/li><li><strong>Progressive cutting:<\/strong> Successive teeth shear material until the finishing teeth exit the part.<\/li><li><strong>Clearance and inspection:<\/strong> Remove the part, brush chips from the gullets, and gauge the feature.<\/li><\/ol>\n\n\n\n<p class=\"wp-block-paragraph\">Push broaching is widely used in toolrooms, maintenance departments, and small-batch shops because a standard keyway broach set, slotted bushing, and arbor or hydraulic press can cut accurate keyways without a dedicated broaching machine. For deeper keyways on standard push sets, thin metal shims are placed behind the broach on subsequent passes until full depth is reached.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For higher-volume push operations on identical bores, Pilot Precision Products notes that production push-type keyway broaches are engineered as self-supporting tools that cut full width and depth in one pass without separate shims or bushings, using hydraulic or hand-operated presses. <em>American Machinist<\/em> also points out that burnishing broaches&mdash;used to polish bores and tighten finish with total diameter changes of 0.0005 to 0.001 inches&mdash;are typically short tools designed as push broaches.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"advantages-of-push-broaching\"><span class=\"ez-toc-section\" id=\"Advantages_of_Push_Broaching\"><\/span>Advantages of Push Broaching<span class=\"ez-toc-section-end\"><\/span><\/h3>\n\n\n\n<ul class=\"wp-block-list\"><li><strong>Lower capital entry:<\/strong> Basic setups can run on existing arbor presses or general-purpose hydraulic presses with proper fixtures.<\/li><li><strong>Simple tooling for standard slots:<\/strong> Standardized keyway broaches and collared bushings are widely stocked in inch and metric sizes.<\/li><li><strong>Compact footprint:<\/strong> Short tool strokes keep machine height and floor space modest.<\/li><li><strong>Practical for maintenance and prototypes:<\/strong> Fast changeovers suit repair work and low-volume runs.<\/li><\/ul>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"limitations-of-push-broaching\"><span class=\"ez-toc-section\" id=\"Limitations_of_Push_Broaching\"><\/span>Limitations of Push Broaching<span class=\"ez-toc-section-end\"><\/span><\/h3>\n\n\n\n<ul class=\"wp-block-list\"><li><strong>Buckling constraint:<\/strong> Compressive stress restricts tool slenderness and total length of cut.<\/li><li><strong>Alignment sensitivity:<\/strong> Any tilt between the ram, bushing, and workpiece induces bending loads that can snap teeth or fracture the bar.<\/li><li><strong>Multi-pass trade-off:<\/strong> Deep features often require shims and multiple passes, increasing cycle time.<\/li><li><strong>Manual handling:<\/strong> Basic press setups rely on operator placement, limiting cycle repeatability and automation.<\/li><\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">For standard slot tooling, review our <a href=\"https:\/\/broachingmach.com\/en_ca\/broach-tools\/keyway-broaches\/\">keyway broaches<\/a> and full <a href=\"https:\/\/broachingmach.com\/en_ca\/broach-tools\/\">broach tools<\/a> lineup.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"how-pull-broaching-works-under-tension\"><span class=\"ez-toc-section\" id=\"How_Pull_Broaching_Works_Under_Tension\"><\/span>How Pull Broaching Works Under Tension<span class=\"ez-toc-section-end\"><\/span><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">In pull broaching, the workpiece rests against a locating fixture while the broach is threaded through the starter hole and coupled to a mechanical or hydraulic pull head. A typical cycle runs as follows:<\/p>\n\n\n\n<ol class=\"wp-block-list\"><li><strong>Load part:<\/strong> Position and clamp the workpiece on the fixture face or table.<\/li><li><strong>Thread pilot:<\/strong> Pass the front pilot and pull shank through the starter hole; the front pilot checks hole size and establishes axial alignment.<\/li><li><strong>Engage puller:<\/strong> Lock the pull end into the machine&#39;s pull head.<\/li><li><strong>Pull stroke:<\/strong> Draw the broach through the part at a controlled cutting speed while flooding the cut with coolant.<\/li><li><strong>Part removal and tool return:<\/strong> Unload the finished part before returning or transferring the broach through the fixture.<\/li><li><strong>Inspect:<\/strong> Verify profile geometry, pitch, and surface finish.<\/li><\/ol>\n\n\n\n<p class=\"wp-block-paragraph\">Because tension eliminates column buckling, a pull broach can be long enough to combine three distinct tooth sections in one continuous bar: roughing teeth with larger tooth rise and staggered chipbreakers, semi-finishing teeth with tighter pitch, and equal-height finishing teeth. <em>American Machinist<\/em> notes that chipbreakers are especially critical on round broaches; without them, continuous ring-shaped chips pack into the tooth gullets and can break the tool. For very long or high-precision pull tools, modular shell broaches allow worn roughing or finishing sections to be removed, resharpened, or replaced without scrapping the entire bar.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"advantages-of-pull-broaching\"><span class=\"ez-toc-section\" id=\"Advantages_of_Pull_Broaching\"><\/span>Advantages of Pull Broaching<span class=\"ez-toc-section-end\"><\/span><\/h3>\n\n\n\n<ul class=\"wp-block-list\"><li><strong>Longer stroke and single-pass completion:<\/strong> Roughing, semi-finishing, and finishing happen in one continuous stroke.<\/li><li><strong>Higher dimensional stability on long cuts:<\/strong> Tensile loading keeps long bars straight and reduces lateral drift.<\/li><li><strong>Controlled machine kinematics:<\/strong> Dedicated pull machines regulate cutting speed, stroke, and pull-head alignment.<\/li><li><strong>Production automation:<\/strong> Compatible with automatic tool retrievers, multi-station fixtures, and robotic part loading.<\/li><\/ul>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"limitations-of-pull-broaching\"><span class=\"ez-toc-section\" id=\"Limitations_of_Pull_Broaching\"><\/span>Limitations of Pull Broaching<span class=\"ez-toc-section-end\"><\/span><\/h3>\n\n\n\n<ul class=\"wp-block-list\"><li><strong>Dedicated machine requirement:<\/strong> Requires a specialized pulling mechanism, retriever, and sufficient stroke\/daylight.<\/li><li><strong>Higher initial investment:<\/strong> Machine and long-broach tooling costs require higher production volume or strict tolerance justification.<\/li><li><strong>Tool handling and storage:<\/strong> Long, slender broaches need dedicated racks, careful resharpening, and inspection to prevent nicked teeth.<\/li><\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">BroachingMach builds both <a href=\"https:\/\/broachingmach.com\/en_ca\/horizontal-broaching-machine\/\">horizontal broaching machines<\/a> and <a href=\"https:\/\/broachingmach.com\/en_ca\/vertical-broaching-machine\/\">vertical broaching machines<\/a> configured for pull-type internal and surface operations.<\/p>\n\n\n\n<figure class=\"wp-block-image aligncenter size-large\"><img decoding=\"async\" width=\"405\" height=\"432\" src=\"https:\/\/broachingmach.com\/wp-content\/uploads\/2024\/05\/Pull-Down-Inner-Broaching-Machine1.jpg\" alt=\"Vertical pull-down internal broaching machine for tension broaching\" class=\"wp-image-3733\" title=\"\" srcset=\"https:\/\/broachingmach.com\/wp-content\/uploads\/2024\/05\/Pull-Down-Inner-Broaching-Machine1.jpg 405w, https:\/\/broachingmach.com\/wp-content\/uploads\/2024\/05\/Pull-Down-Inner-Broaching-Machine1-281x300.jpg 281w\" sizes=\"(max-width: 405px) 100vw, 405px\" \/><figcaption class=\"wp-element-caption\">A BroachingMach vertical pull-down internal broaching machine designed for rigid workpiece support and repeatable pull strokes.<\/figcaption><\/figure>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"machine-orientation-push-and-pull-vs-horizontal-and-vertical\"><span class=\"ez-toc-section\" id=\"Machine_Orientation_Push_and_Pull_vs_Horizontal_and_Vertical\"><\/span>Machine Orientation: Push and Pull vs Horizontal and Vertical<span class=\"ez-toc-section-end\"><\/span><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Buyers frequently confuse force direction with machine orientation. They are two independent engineering choices:<\/p>\n\n\n\n<ul class=\"wp-block-list\"><li><strong>Push or pull<\/strong> defines whether the tool is loaded in compression or tension.<\/li><li><strong>Horizontal or vertical<\/strong> defines the structural axis of the machine slide and workpiece table.<\/li><\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">According to <em>American Machinist<\/em>, vertical broaching machines account for roughly 60 percent of machines in service and are almost all hydraulically driven, while horizontal machines represent about 40 percent. Vertical internal machines are built in push-down, pull-up, pull-down, and table-up configurations:<\/p>\n\n\n\n<ul class=\"wp-block-list\"><li><strong>Vertical push-down:<\/strong> Often built like heavy hydraulic presses with guided fixtures, typically rated at 2 to 25 tons with strokes up to 36 inches and speeds up to 40 FPM.<\/li><li><strong>Vertical pull-up:<\/strong> The part sits beneath the table and the broach pulls upward; typical ratings span 6 to 50 tons, strokes up to 72 inches, and speeds around 30 FPM.<\/li><li><strong>Vertical pull-down:<\/strong> The part sits on top of the worktable in a precision locating fixture, enabling tighter tolerances; capacities range from 2 to 75 tons, strokes from 30 to 110 inches, and speeds up to 80 FPM.<\/li><\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">When stroke length grows beyond shop ceiling clearance&mdash;some tall vertical machines exceed 20 feet and require floor pits&mdash;horizontal internal pull machines become the practical alternative. Hydraulic horizontal internal machines typically deliver 2.5 to 75 tons of pulling capacity, strokes up to 120 inches, and cutting speeds generally below 40 FPM. For a deeper layout comparison, see our guide on <a href=\"https:\/\/broachingmach.com\/en_ca\/difference-between-horizontal-and-vertical-broaching-machine\/\">horizontal vs vertical broaching machines<\/a>.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"accuracy-surface-finish-and-tooling-variables\"><span class=\"ez-toc-section\" id=\"Accuracy_Surface_Finish_and_Tooling_Variables\"><\/span>Accuracy, Surface Finish, and Tooling Variables<span class=\"ez-toc-section-end\"><\/span><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Neither push nor pull broaching is inherently more accurate in every case. Final bore or profile accuracy depends on the complete machining system:<\/p>\n\n\n\n<ul class=\"wp-block-list\"><li><strong>Tooth engagement and pitch:<\/strong> Both <em>American Machinist<\/em> and MSC Industrial Supply emphasize keeping at least two teeth engaged in the cut simultaneously so the broach cannot drift or chatter inside the bore.<\/li><li><strong>Workpiece hardness:<\/strong> MSC Industrial Supply recommends broaching materials up to HRC 38 with standard High Speed Steel (HSS) broaches; harder materials accelerate edge chipping unless specialized hard-broaching tooling is engineered.<\/li><li><strong>Tool material and coatings:<\/strong> Standard HSS handles general ferrous and nonferrous alloys, bright finishes aid chip flow in aluminum and plastics, TiN coatings improve wear resistance and chip evacuation, and TiAlN coatings support higher speeds in tough steel and stainless alloys.<\/li><li><strong>Geometry and resharpening:<\/strong> Hook angle matches material ductility (larger hook for soft steel, smaller for hard or brittle alloys), while a narrow straight land behind finishing teeth preserves final size across repeated face-grinding resharpening cycles.<\/li><li><strong>Pilot and fixture alignment:<\/strong> Starter-hole concentricity, bushing fit, cutting fluid supply, and rear pilot support govern runout and surface finish.<\/li><\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Pull broaching tends to outperform push broaching on tight-tolerance production splines and deep bores because a dedicated pull-down or horizontal machine pairs rigid part location with a full-length finishing section. Even so, a properly guided push broach can hold tight keyway widths on short parts.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"how-to-choose-between-push-and-pull-broaching\"><span class=\"ez-toc-section\" id=\"How_to_Choose_Between_Push_and_Pull_Broaching\"><\/span>How to Choose Between Push and Pull Broaching<span class=\"ez-toc-section-end\"><\/span><\/h2>\n\n\n\n<figure class=\"wp-block-image aligncenter size-large\"><img decoding=\"async\" width=\"1600\" height=\"1050\" src=\"https:\/\/broachingmach.com\/wp-content\/uploads\/2026\/07\/push-vs-pull-selection-flowchart.png\" alt=\"Decision flowchart for choosing between push broaching and pull broaching\" class=\"wp-image-6501\" title=\"\" srcset=\"https:\/\/broachingmach.com\/wp-content\/uploads\/2026\/07\/push-vs-pull-selection-flowchart.png 1600w, https:\/\/broachingmach.com\/wp-content\/uploads\/2026\/07\/push-vs-pull-selection-flowchart-300x197.png 300w, https:\/\/broachingmach.com\/wp-content\/uploads\/2026\/07\/push-vs-pull-selection-flowchart-1024x672.png 1024w, https:\/\/broachingmach.com\/wp-content\/uploads\/2026\/07\/push-vs-pull-selection-flowchart-768x504.png 768w, https:\/\/broachingmach.com\/wp-content\/uploads\/2026\/07\/push-vs-pull-selection-flowchart-1536x1008.png 1536w, https:\/\/broachingmach.com\/wp-content\/uploads\/2026\/07\/push-vs-pull-selection-flowchart-18x12.png 18w\" sizes=\"(max-width: 1600px) 100vw, 1600px\" \/><figcaption class=\"wp-element-caption\">Engineering decision flow based on tool slenderness, cut length, production volume, and available machine stroke.<\/figcaption><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Evaluate these five engineering questions before specifying tooling or equipment:<\/p>\n\n\n\n<ol class=\"wp-block-list\"><li><strong>Can a short, rigid tool finish the cut?<\/strong> If the cut length and stock removal fit a short, well-guided bar and a suitable press is on hand, push broaching is viable. If the required tooth count makes the bar slender, pull broaching avoids buckling.<\/li><li><strong>How long is the feature?<\/strong> Longer bores, splines, and deep hex or square profiles demand more teeth and larger chip gullets, favoring a pull broach.<\/li><li><strong>What is the annual production volume?<\/strong> Low-volume jobs, maintenance, and prototypes favor push broaching on an arbor or hydraulic press. Repeat production and automated cells favor dedicated pull machines.<\/li><li><strong>What geometry and tolerance are required?<\/strong> Standard short keyways and light hole sizing are common push applications. Internal splines, serrations, and tight-concentricity production bores usually require pull-down or horizontal pull broaching.<\/li><li><strong>Does existing equipment meet stroke and rigidity needs?<\/strong> An available shop press is only suitable for push broaching if its ram alignment, stroke, tonnage margin, and speed control match the tool. Likewise, a pull machine must have enough stroke and daylight for the complete broach plus part height.<\/li><\/ol>\n\n\n\n<p class=\"wp-block-paragraph\">Use our <a href=\"https:\/\/broachingmach.com\/en_ca\/how-to-choose-the-right-broaching-machine\/\">broaching machine selection guide<\/a> and <a href=\"https:\/\/broachingmach.com\/en_ca\/how-to-calculate-broaching-machine-tonnage\/\">broaching tonnage calculator guide<\/a> to size your equipment.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"information-needed-for-a-broaching-quote\"><span class=\"ez-toc-section\" id=\"Information_Needed_for_a_Broaching_Quote\"><\/span>Information Needed for a Broaching Quote<span class=\"ez-toc-section-end\"><\/span><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">To evaluate tooling and machine options accurately, an engineering review should include:<\/p>\n\n\n\n<ul class=\"wp-block-list\"><li>Part drawing with feature geometry, tolerances, and surface-finish callouts<\/li><li>Workpiece alloy and heat-treat hardness before broaching<\/li><li>Pre-machined starter-hole diameter and concentricity<\/li><li>Length of cut and total stock removal per side<\/li><li>Annual production volume and target cycle time<\/li><li>Available press or broaching machine tonnage, stroke, and daylight<\/li><li>Coolant type and part loading or automation constraints<\/li><\/ul>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"frequently-asked-questions\"><span class=\"ez-toc-section\" id=\"Frequently_Asked_Questions\"><\/span>Frequently Asked Questions<span class=\"ez-toc-section-end\"><\/span><\/h2>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"can-push-or-pull-broaching-cut-a-blind-hole\"><span class=\"ez-toc-section\" id=\"Can_push_or_pull_broaching_cut_a_blind_hole\"><\/span>Can push or pull broaching cut a blind hole?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">No. Traditional linear push and pull broaching both require a through-hole or open exit path so the broach can pass completely through the workpiece and clear chips. Blind polygonal or keyway features typically require rotary (wobble) broaching or CNC single-point slotting with a chip relief undercut.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"why-do-some-keyway-broaches-need-shims-while-others-finish-in-one-pass\"><span class=\"ez-toc-section\" id=\"Why_do_some_keyway_broaches_need_shims_while_others_finish_in_one_pass\"><\/span>Why do some keyway broaches need shims while others finish in one pass?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Standard toolroom keyway broach sets use shorter bars paired with slotted bushings so one broach can serve multiple bore sizes, relying on shims to step the tool deeper across multiple passes. Production push-type and pull-type keyway broaches are built longer and self-supporting for a specific bore and keyway size, completing the slot in one stroke.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"when-should-a-shop-upgrade-from-a-press-push-setup-to-a-pull-broaching-machine\"><span class=\"ez-toc-section\" id=\"When_should_a_shop_upgrade_from_a_press_push_setup_to_a_pull_broaching_machine\"><\/span>When should a shop upgrade from a press push setup to a pull broaching machine?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Upgrade when cut length forces multi-pass shimming that bottlenecks cycle time, when slender push tools begin breaking from alignment sensitivity, or when production volume justifies dedicated pull-head automation and single-stroke repeatability.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"what-details-are-needed-to-size-a-broaching-machine\"><span class=\"ez-toc-section\" id=\"What_details_are_needed_to_size_a_broaching_machine\"><\/span>What details are needed to size a broaching machine?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Provide the feature drawing, material hardness, length of cut, starter-hole dimensions, and target output per hour&mdash;covered in the engineering checklist above&mdash;so tooling engineers can calculate required tonnage, tooth pitch, and minimum machine stroke.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"need-help-selecting-the-process\"><span class=\"ez-toc-section\" id=\"Need_Help_Selecting_the_Process\"><\/span>Need Help Selecting the Process?<span class=\"ez-toc-section-end\"><\/span><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">BroachingMach engineers review the workpiece, broach geometry, fixture, and machine stroke as one integrated system. Share your part drawing, material hardness, cut length, and production volume with our team to determine the right setup.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><a href=\"https:\/\/broachingmach.com\/en_ca\/contact\/\">Contact BroachingMach<\/a> to discuss your push or pull broaching application.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"references\"><span class=\"ez-toc-section\" id=\"References\"><\/span>References<span class=\"ez-toc-section-end\"><\/span><\/h2>\n\n\n\n<ul class=\"wp-block-list\"><li><em><a href=\"https:\/\/www.americanmachinist.com\/cutting-tools\/media-gallery\/21135347\/chapter-14-broaches-and-broaching-cutting-tool-applications\" target=\"_blank\" rel=\"noopener\">Chapter 14: Broaches and Broaching | Cutting Tool Applications<\/a> &mdash; American Machinist.<\/em><\/li><li><em><a href=\"https:\/\/pilotprecision.com\/broaching-keyway-broaches\/\" target=\"_blank\" rel=\"noopener\">Broaching &#8211; Keyway Broaches<\/a> &mdash; Pilot Precision Products.<\/em><\/li><li><em><a href=\"https:\/\/www.mscdirect.com\/resources\/buying-guides\/broaches\" target=\"_blank\" rel=\"noopener\">Broach Tool Types &amp; Broaching Tips<\/a> &mdash; MSC Industrial Supply Co.<\/em><\/li><\/ul>","protected":false},"excerpt":{"rendered":"<p>Push broaching loads a shorter broach in compression, while pull broaching draws a longer tool through the workpiece in tension. Compare their tooling, machines, applications and selection criteria.<\/p>","protected":false},"author":1,"featured_media":6499,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","ast-disable-related-posts":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"default","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"footnotes":""},"categories":[23,30],"tags":[],"class_list":["post-6502","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-broaching","category-broaching-process"],"_links":{"self":[{"href":"https:\/\/broachingmach.com\/en_ca\/wp-json\/wp\/v2\/posts\/6502","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/broachingmach.com\/en_ca\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/broachingmach.com\/en_ca\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/broachingmach.com\/en_ca\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/broachingmach.com\/en_ca\/wp-json\/wp\/v2\/comments?post=6502"}],"version-history":[{"count":3,"href":"https:\/\/broachingmach.com\/en_ca\/wp-json\/wp\/v2\/posts\/6502\/revisions"}],"predecessor-version":[{"id":9483,"href":"https:\/\/broachingmach.com\/en_ca\/wp-json\/wp\/v2\/posts\/6502\/revisions\/9483"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/broachingmach.com\/en_ca\/wp-json\/wp\/v2\/media\/6499"}],"wp:attachment":[{"href":"https:\/\/broachingmach.com\/en_ca\/wp-json\/wp\/v2\/media?parent=6502"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/broachingmach.com\/en_ca\/wp-json\/wp\/v2\/categories?post=6502"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/broachingmach.com\/en_ca\/wp-json\/wp\/v2\/tags?post=6502"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}