{"id":5354,"date":"2024-08-16T08:39:52","date_gmt":"2024-08-16T08:39:52","guid":{"rendered":"https:\/\/broachingmach.com\/?p=5354"},"modified":"2026-11-12T14:40:40","modified_gmt":"2026-11-12T06:40:40","slug":"external-broaching-machine-guide","status":"publish","type":"post","link":"https:\/\/broachingmach.com\/fr\/external-broaching-machine-guide\/","title":{"rendered":"Brocheuse externe : Un excellent choix pour le traitement des surfaces externes"},"content":{"rendered":"<h2 class=\"wp-block-heading\" id=\"table-of-contents\"><span class=\"ez-toc-section\" id=\"Table_of_Contents\"><\/span>Table des mati\u00e8res<span class=\"ez-toc-section-end\"><\/span><\/h2>\n\n\n\n<ul class=\"wp-block-list\"><li><a href=\"#how-an-external-broaching-machine-cuts\">How an External Broaching Machine Cuts<\/a><\/li><li><a href=\"#choose-the-layout-for-the-outside-feature\">Choose the Layout for the Outside Feature<\/a><\/li><li><a href=\"#design-the-surface-broaching-fixture\">Design the Surface Broaching Fixture<\/a><\/li><li><a href=\"#match-cutting-force-and-usable-stroke\">Match Cutting Force and Usable Stroke<\/a><\/li><li><a href=\"#plan-the-trial-and-inspect-the-cut\">Plan the Trial and Inspect the Cut<\/a><\/li><li><a href=\"#five-checks-before-requesting-a-quote\">Five Checks Before Requesting a Quote<\/a><\/li><li><a href=\"#frequently-asked-questions\">Foire aux questions<\/a><\/li><li><a href=\"#request-an-application-review\">Request an Application Review<\/a><\/li><\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">An external broaching machine cuts a feature on an accessible outside surface. A row of progressively offset teeth passes along the workpiece, removing stock in increments to form a flat, slot, tenon, or other profile. The setup depends on whether the tool passes along an open face, surrounds the part, or cuts one feature at a time as the workpiece indexes between strokes.<\/p><div id=\"ez-toc-container\" class=\"ez-toc-v2_0_90 counter-hierarchy ez-toc-counter ez-toc-grey ez-toc-container-direction\">\n<div class=\"ez-toc-title-container\">\n<div class=\"ez-toc-title\" style=\"cursor:inherit\">Table des mati\u00e8res<\/div>\n<span class=\"ez-toc-title-toggle\"><a href=\"#\" class=\"ez-toc-pull-right ez-toc-btn ez-toc-btn-xs ez-toc-btn-default ez-toc-toggle\" aria-label=\"Toggle Table des mati\u00e8res\"><span class=\"ez-toc-js-icon-con\"><span class=\"\"><span class=\"eztoc-hide\" style=\"display:none;\">Toggle<\/span><span class=\"ez-toc-icon-toggle-span\"><svg style=\"fill: #999;color:#999\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" class=\"list-377408\" width=\"20px\" height=\"20px\" viewbox=\"0 0 24 24\" fill=\"none\"><path d=\"M6 6H4v2h2V6zm14 0H8v2h12V6zM4 11h2v2H4v-2zm16 0H8v2h12v-2zM4 16h2v2H4v-2zm16 0H8v2h12v-2z\" fill=\"currentColor\"><\/path><\/svg><svg style=\"fill: #999;color:#999\" class=\"arrow-unsorted-368013\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" width=\"10px\" height=\"10px\" viewbox=\"0 0 24 24\" version=\"1.2\" baseprofile=\"tiny\"><path d=\"M18.2 9.3l-6.2-6.3-6.2 6.3c-.2.2-.3.4-.3.7s.1.5.3.7c.2.2.4.3.7.3h11c.3 0 .5-.1.7-.3.2-.2.3-.5.3-.7s-.1-.5-.3-.7zM5.8 14.7l6.2 6.3 6.2-6.3c.2-.2.3-.5.3-.7s-.1-.5-.3-.7c-.2-.2-.4-.3-.7-.3h-11c-.3 0-.5.1-.7.3-.2.2-.3.5-.3.7s.1.5.3.7z\"\/><\/svg><\/span><\/span><\/span><\/a><\/span><\/div>\n<nav><ul class='ez-toc-list ez-toc-list-level-1 eztoc-toggle-hide-by-default' ><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-1\" href=\"https:\/\/broachingmach.com\/fr\/external-broaching-machine-guide\/#Table_of_Contents\" >Table des mati\u00e8res<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-2\" href=\"https:\/\/broachingmach.com\/fr\/external-broaching-machine-guide\/#How_an_External_Broaching_Machine_Cuts\" >How an External Broaching Machine Cuts<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-3\" href=\"https:\/\/broachingmach.com\/fr\/external-broaching-machine-guide\/#Choose_the_Layout_for_the_Outside_Feature\" >Choose the Layout for the Outside Feature<\/a><ul class='ez-toc-list-level-3' ><li class='ez-toc-heading-level-3'><a class=\"ez-toc-link ez-toc-heading-4\" href=\"https:\/\/broachingmach.com\/fr\/external-broaching-machine-guide\/#Surface_broaching_and_shop_layout\" >Surface broaching and shop layout<\/a><\/li><\/ul><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-5\" href=\"https:\/\/broachingmach.com\/fr\/external-broaching-machine-guide\/#Design_the_Surface_Broaching_Fixture\" >Design the Surface Broaching Fixture<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-6\" href=\"https:\/\/broachingmach.com\/fr\/external-broaching-machine-guide\/#Match_Cutting_Force_and_Usable_Stroke\" >Match Cutting Force and Usable Stroke<\/a><ul class='ez-toc-list-level-3' ><li class='ez-toc-heading-level-3'><a class=\"ez-toc-link ez-toc-heading-7\" href=\"https:\/\/broachingmach.com\/fr\/external-broaching-machine-guide\/#Check_the_complete_working_travel\" >Check the complete working travel<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-3'><a class=\"ez-toc-link ez-toc-heading-8\" href=\"https:\/\/broachingmach.com\/fr\/external-broaching-machine-guide\/#Ask_what_the_cycle_time_includes\" >Ask what the cycle time includes<\/a><\/li><\/ul><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-9\" href=\"https:\/\/broachingmach.com\/fr\/external-broaching-machine-guide\/#Plan_the_Trial_and_Inspect_the_Cut\" >Plan the Trial and Inspect the Cut<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-10\" href=\"https:\/\/broachingmach.com\/fr\/external-broaching-machine-guide\/#Five_Checks_Before_Requesting_a_Quote\" >Five Checks Before Requesting a Quote<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-11\" href=\"https:\/\/broachingmach.com\/fr\/external-broaching-machine-guide\/#Frequently_Asked_Questions\" >Foire aux questions<\/a><ul class='ez-toc-list-level-3' ><li class='ez-toc-heading-level-3'><a class=\"ez-toc-link ez-toc-heading-12\" href=\"https:\/\/broachingmach.com\/fr\/external-broaching-machine-guide\/#When_should_I_compare_broaching_with_milling\" >When should I compare broaching with milling?<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-3'><a class=\"ez-toc-link ez-toc-heading-13\" href=\"https:\/\/broachingmach.com\/fr\/external-broaching-machine-guide\/#Can_an_external_broaching_machine_finish_a_feature_that_ends_at_a_shoulder\" >Can an external broaching machine finish a feature that ends at a shoulder?<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-3'><a class=\"ez-toc-link ez-toc-heading-14\" href=\"https:\/\/broachingmach.com\/fr\/external-broaching-machine-guide\/#What_changes_when_one_machine_must_run_several_profiles\" >What changes when one machine must run several profiles?<\/a><\/li><\/ul><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-15\" href=\"https:\/\/broachingmach.com\/fr\/external-broaching-machine-guide\/#Request_an_Application_Review\" >Request an Application Review<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-16\" href=\"https:\/\/broachingmach.com\/fr\/external-broaching-machine-guide\/#References\" >References<\/a><\/li><\/ul><\/nav><\/div>\n\n\n\n\n<p class=\"wp-block-paragraph\">This guide is for manufacturing engineers and equipment buyers specifying linear external broaching. Start with the blank and finished drawings, then check the tool path, fixture, available force, and inspection method as a single setup.<\/p>\n\n\n\n<blockquote class=\"wp-block-quote is-layout-flow wp-block-quote-is-layout-flow\"><p class=\"wp-block-paragraph\"><strong>Key takeaways<\/strong><\/p>\n<ul class=\"wp-block-list\"><li>Confirm how the broach enters, clears the final surface, and returns without crossing a clamp or shoulder.<\/li><li>Ask the machine builder to show the force and stroke available with the actual holder, fixture, and cutting speed.<\/li><li>Agree on where to measure profile, size, and surface finish on a representative trial part.<\/li><\/ul>\n<\/blockquote>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"how-an-external-broaching-machine-cuts\"><span class=\"ez-toc-section\" id=\"How_an_External_Broaching_Machine_Cuts\"><\/span>How an External Broaching Machine Cuts<span class=\"ez-toc-section-end\"><\/span><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">In their CIRP Annals review, Arrazola et al. explain how successive cutting edges remove material progressively. The offset in tooth height is the <strong>rise per tooth<\/strong>, a tool geometry that helps determine the thickness removed by each edge. As the cutting teeth cross the workpiece, their engagement changes with the part length, tooth pitch, and stock profile. The machine provides motion and carries the cutting load through the slide and holder into the bed and workholding.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">A surface broaching tool can use roughing and finishing teeth along the same working length. For a part with heavy or uneven stock, the toolmaker may split the cutting sequence into separate sections. Arrazola et al. discuss segmented tooling when stock removal or machine force constrains the design. If the quote calls for a segmented assembly, ask where the cutting sequence changes and how the holder locates a replacement section after sharpening or service.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The cut and the index are separate movements on an indexed external broaching machine. UBright&#39;s <a href=\"https:\/\/broachingmach.com\/fr\/hydraulic-broaching-machine\/cnc-hydraulic-external-tenon-broaching-machine\/\">external tenon machine example<\/a> describes locking the workpiece before cutting, retracting for clearance, and rotating the workpiece before the next stroke. When the drawing shows repeated features around a disk, ask the supplier to show how the table locks for the cut and how each indexed position will be verified.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"choose-the-layout-for-the-outside-feature\"><span class=\"ez-toc-section\" id=\"Choose_the_Layout_for_the_Outside_Feature\"><\/span>Choose the Layout for the Outside Feature<span class=\"ez-toc-section-end\"><\/span><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Arrazola et al. distinguish external machine layouts by direction of travel and show pot, duplex, and continuous configurations in their machine classification. Start from the part feature and establish whether the tool, the workpiece, or the fixture moves during cutting and return. That choice affects the clearance required for loading as well as the shape the tool can reach.<\/p>\n\n\n\n<figure class=\"wp-block-table is-style-stripes\"><table><thead><tr><th>Feature on the drawing<\/th><th>Configuration to evaluate<\/th><th>Constraint to check first<\/th><\/tr><\/thead><tbody><tr><td>Flat face, straight slot, or open profile<\/td><td>Surface broaching with a holder that guides the tool along the feature<\/td><td>Show approach, overrun, and how the workpiece is supported near the cut.<\/td><\/tr><tr><td>External spline or similar form around a shaft<\/td><td>Pot broaching with the part passing through a ring of tooling<\/td><td>Check the full part envelope, including any flange, shoulder, and exit path.<\/td><\/tr><tr><td>Repeated tenons or slots around a disk<\/td><td>Indexed external broaching with a workpiece locator and lock<\/td><td>Specify the datum for clocking, the cutting position, and the clearance for indexing.<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"surface-broaching-and-shop-layout\"><span class=\"ez-toc-section\" id=\"Surface_broaching_and_shop_layout\"><\/span>Surface broaching and shop layout<span class=\"ez-toc-section-end\"><\/span><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">In a horizontal arrangement, check how the workpiece reaches the fixture and how the holder is supported along its working travel. In a vertical arrangement, check the available height for loading, the fixture position, and the space needed to remove the tool. Use a layout drawing that includes guarding and service access. A footprint quoted from the machine base alone can omit the space used by a part handler or the travel needed to extract the tool holder.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Le <a href=\"https:\/\/broachingmach.com\/fr\/surface-broaching-machine-guide\/\">surface broaching machine guide<\/a> goes into tool arrangements and applications for open faces. If a part must pass through the tooling package, review the <a href=\"https:\/\/broachingmach.com\/fr\/pot-broaching-process-tooling-guide\/\">pot broaching tooling guide<\/a> for that route. The <a href=\"https:\/\/broachingmach.com\/fr\/internal-broaching-machine-vs-external-broaching-machine\/\">internal and external comparison<\/a> covers parts for which the drawing also calls for a broached feature inside a bore.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"design-the-surface-broaching-fixture\"><span class=\"ez-toc-section\" id=\"Design_the_Surface_Broaching_Fixture\"><\/span>Design the Surface Broaching Fixture<span class=\"ez-toc-section-end\"><\/span><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Separate the features that <strong>locate<\/strong> the part from the supports that <strong>react the cutting load<\/strong>. For a bracket whose finished slot is dimensioned from a mounting face, show which pads establish that face, which stop fixes the position along the stroke, and which support sits closest to the force path. Check that the same loading arrangement can handle the expected variation in the blank without a clamp moving into the cutter&#39;s path.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Ortiz-de-Zarate et al. studied external slot broaching with workpieces clamped on a dynamometer. Their setup used rectangular slots <strong>15 mm<\/strong> wide and tools with <strong>8 mm<\/strong> pitch. The selected workpiece geometry put <strong>two to three teeth<\/strong> in contact at once. The workpiece overhung the clamp by <strong>5 mm<\/strong>, and the clamping screw line sat <strong>7 mm<\/strong> back from the surface. They observed larger surface topography variations when the load was higher and directed more steeply into the machined surface. When reviewing a surface broaching fixture, ask where the resultant cutting load travels through the part and how the tooling and workholding resist deflection at that location.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">On a thin flange, the inspector should know whether the drawing applies to the free part or the clamped setup. If the fixture can distort the flange, agree where to take the acceptance measurements after release. On a forged blank, specify which prior surfaces are already machined and which can vary before broaching. Any blank surface used for location should be identified on the setup drawing so the buyer and fixture designer use the same datum chain.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For an indexed workpiece, ask for the relationship between the workpiece datum, the index axis, and the cutting path. A proposal should explain how the fixture reproduces the first position after a tool change and how angular spacing is checked around the part. This matters when a feature needs to align with an existing hole or when its position is measured from an already machined diameter.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"match-cutting-force-and-usable-stroke\"><span class=\"ez-toc-section\" id=\"Match_Cutting_Force_and_Usable_Stroke\"><\/span>Match Cutting Force and Usable Stroke<span class=\"ez-toc-section-end\"><\/span><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Arrazola et al. list force and stroke separately in their classification of broaching machines. A force rating describes the machine&#39;s capacity. A job&#39;s peak load also depends on the material, stock allowance, number of teeth engaged, and tool geometry. Ask the toolmaker to supply the predicted load for the actual blank, including the condition that gives the highest engagement. Compare it with the force the proposed machine can provide at the intended cutting speed.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"check-the-complete-working-travel\"><span class=\"ez-toc-section\" id=\"Check_the_complete_working_travel\"><\/span>Check the complete working travel<span class=\"ez-toc-section-end\"><\/span><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Request a drawing of the external broaching machine with the holder and fixture installed. Mark the start of usable travel, first contact, the point where the final tooth clears the part, and the return or clearance position. A blank with a shoulder can need an offset entry, special tool geometry, or a different fixture arrangement. It is easier to resolve that on the layout drawing than after ordering a machine from its nominal stroke alone.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Zanger et al. found that in their single-tooth tests on normalized SAE 1045 steel, specific cutting forces continued to adjust after the cutting thickness had leveled out. Their experimental profiles covered final cutting thicknesses of <strong>20\u201340 &micro;m<\/strong>. When a surface broaching trial includes a force trace, ask the supplier to mark tooth entry, the main cutting interval, and exit so the observed peak can be compared with the predicted load case. A single average over the cycle can conceal the event that sets the capacity requirement.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"ask-what-the-cycle-time-includes\"><span class=\"ez-toc-section\" id=\"Ask_what_the_cycle_time_includes\"><\/span>Ask what the cycle time includes<span class=\"ez-toc-section-end\"><\/span><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Specify whether the quote covers loading, clamping, cutting, return, chip removal, and any index moves. For a part with several repeated profiles, distinguish one cutting stroke from a complete workpiece cycle. Ask which tool or fixture changes are needed across the intended product mix and which checks are required after each change. The <a href=\"https:\/\/broachingmach.com\/fr\/surface-broaching-machine\/\">surface broaching machine range<\/a> provides layout examples for an initial comparison.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"plan-the-trial-and-inspect-the-cut\"><span class=\"ez-toc-section\" id=\"Plan_the_Trial_and_Inspect_the_Cut\"><\/span>Plan the Trial and Inspect the Cut<span class=\"ez-toc-section-end\"><\/span><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">In the slot broaching experiments by Ortiz-de-Zarate et al., the researchers measured topography along the machined length and distinguished the behavior at different points in the cut. The same distinction is useful in a machine trial. Mark the areas of the drawing where profile or finish is critical and agree how close the inspection should come to tool entry and exit. For a broached surface that will later mate against another part, record the inspection location and direction alongside the reported result.<\/p>\n\n\n\n<ol class=\"wp-block-list\"><li><strong>Select representative blanks.<\/strong> State the material grade, condition, and prior operation. Include the expected range of stock where it changes tooth engagement. Label the blanks so unusual load peaks or surface readings can be traced to individual parts.<\/li><li><strong>Record the setup.<\/strong> Identify the broach and holder, fixture position, cutting speed, and fluid arrangement. If the external broaching machine records cutting force, ask for the trace with the stroke position. Record any chip clearing required between cuts.<\/li><li><strong>Inspect the specified feature.<\/strong> Use the drawing datums to measure the finished profile or slot width and position. Record roughness at the agreed locations. For indexed work, check both individual features and their spacing around the full circumference.<\/li><li><strong>Repeat after a planned interruption.<\/strong> If normal production includes a tool reset, fixture exchange, or restart, agree which settings will be recorded and which dimensions will be checked on the first part after the interruption.<\/li><\/ol>\n\n\n\n<p class=\"wp-block-paragraph\">If the part fails inspection, keep the force and measurement records together. A position error that tracks the index station suggests a different investigation from surface waviness that follows the tooth pitch along the cut. Ask the supplier to identify the setup change and show its effect on a repeat trial using comparable blanks.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"five-checks-before-requesting-a-quote\"><span class=\"ez-toc-section\" id=\"Five_Checks_Before_Requesting_a_Quote\"><\/span>Five Checks Before Requesting a Quote<span class=\"ez-toc-section-end\"><\/span><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Arrazola et al. describe monitoring signals in relation to the geometry and engagement of individual broach teeth. In a proposal, connect the force estimate and inspection plan to the proposed cutter, fixture, and part drawing. Use the same input package for every external broaching machine quote.<\/p>\n\n\n\n<figure class=\"wp-block-table is-style-stripes\"><table><thead><tr><th>Check<\/th><th>Information to send<\/th><th>What the supplier should return<\/th><\/tr><\/thead><tbody><tr><td>Feature and blank<\/td><td>Finished profile, section view, material, blank stock range<\/td><td>Proposed broaching configuration and cutting direction<\/td><\/tr><tr><td>Tool path<\/td><td>Shoulders, approach limits, and access around the part<\/td><td>Usable stroke and holder layout showing approach, clearance, and return<\/td><\/tr><tr><td>Fixture and datum<\/td><td>Location references, clamping constraints, and part handling<\/td><td>Locator and support drawing that shows where the cutting reaction goes<\/td><\/tr><tr><td>Load and cycle<\/td><td>Production mix, lot size, and any handling or indexing constraints<\/td><td>Peak cutting load at the proposed speed and cycle timing for a complete part<\/td><\/tr><tr><td>Trial and acceptance<\/td><td>Tolerances, finish requirements, and measurement locations<\/td><td>Trial blanks, sampling sequence, and a record of the process and inspection results<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"frequently-asked-questions\"><span class=\"ez-toc-section\" id=\"Frequently_Asked_Questions\"><\/span>Foire aux questions<span class=\"ez-toc-section-end\"><\/span><\/h2>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"when-should-i-compare-broaching-with-milling\"><span class=\"ez-toc-section\" id=\"When_should_I_compare_broaching_with_milling\"><\/span>When should I compare broaching with milling?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Compare both processes when the part has a stable recurring profile but the volume or product mix is uncertain. Request tooling and fixture costs separately, then compare cycle time for a conforming part, including changeover and inspection. Use the same blank, drawing tolerances, and annual mix for both proposals.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"can-an-external-broaching-machine-finish-a-feature-that-ends-at-a-shoulder\"><span class=\"ez-toc-section\" id=\"Can_an_external_broaching_machine_finish_a_feature_that_ends_at_a_shoulder\"><\/span>Can an external broaching machine finish a feature that ends at a shoulder?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Have the toolmaker plot the approach and exit of the entire tool against a section view. The shoulder may block the finishing teeth or the holder even when the cutting edge can reach the feature. The layout should show how the proposed tool clears the part before a machine is selected.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"what-changes-when-one-machine-must-run-several-profiles\"><span class=\"ez-toc-section\" id=\"What_changes_when_one_machine_must_run_several_profiles\"><\/span>What changes when one machine must run several profiles?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Ask which parts can share fixture locators and tool holders, which need a separate setup, and how the operator verifies the first part after changing over. Request a cycle estimate for the expected mix, with tool handling and first-piece inspection stated separately from cutting time.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"request-an-application-review\"><span class=\"ez-toc-section\" id=\"Request_an_Application_Review\"><\/span>Request an Application Review<span class=\"ez-toc-section-end\"><\/span><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Bring the blank and finished drawings, material condition, expected lot sizes, and inspection requirements to the same discussion. A machine review can then connect the tool path and fixture to the rated force, usable stroke, and trial plan. <a href=\"https:\/\/broachingmach.com\/fr\/contact\/\">Contact UBright with your part drawing<\/a> to review the external broaching machine configuration for your part.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"references\"><span class=\"ez-toc-section\" id=\"References\"><\/span>References<span class=\"ez-toc-section-end\"><\/span><\/h2>\n\n\n\n<ul class=\"wp-block-list\"><li><em><a href=\"https:\/\/ebiltegia.mondragon.edu\/xmlui\/handle\/20.500.11984\/1818?show=full\" target=\"_blank\" rel=\"noopener\">Broaching: Cutting tools and machine tools for manufacturing high quality features in components<\/a> &mdash; Arrazola et al., 2020. Explains progressive cutting, segmented broaches, machine layouts, and monitoring.<\/em><\/li><li><em><a href=\"https:\/\/eprints.whiterose.ac.uk\/id\/eprint\/187488\/\" target=\"_blank\" rel=\"noopener\">Surface topography irregularities generated by broaching<\/a> &mdash; Ortiz-de-Zarate et al., 2022. Reports slot broaching tests and the relation of forces and stiffness to measured topography.<\/em><\/li><li><em><a href=\"https:\/\/publikationen.bibliothek.kit.edu\/1000147176\" target=\"_blank\" rel=\"noopener\">Surface Quality after Broaching with Variable Cutting Thickness<\/a> &mdash; Zanger et al., 2014. Reports cutting-force behavior under varying cutting thickness in single-tooth tests.<\/em><\/li><\/ul>","protected":false},"excerpt":{"rendered":"<p>Table of Contents An external broaching machine cuts a feature on an accessible outside surface. A row of progressively offset [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":9462,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","ast-disable-related-posts":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"set","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"footnotes":""},"categories":[23,29],"tags":[],"class_list":["post-5354","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-broaching","category-broaching-machines"],"_links":{"self":[{"href":"https:\/\/broachingmach.com\/fr\/wp-json\/wp\/v2\/posts\/5354","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/broachingmach.com\/fr\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/broachingmach.com\/fr\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/broachingmach.com\/fr\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/broachingmach.com\/fr\/wp-json\/wp\/v2\/comments?post=5354"}],"version-history":[{"count":11,"href":"https:\/\/broachingmach.com\/fr\/wp-json\/wp\/v2\/posts\/5354\/revisions"}],"predecessor-version":[{"id":9463,"href":"https:\/\/broachingmach.com\/fr\/wp-json\/wp\/v2\/posts\/5354\/revisions\/9463"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/broachingmach.com\/fr\/wp-json\/wp\/v2\/media\/9462"}],"wp:attachment":[{"href":"https:\/\/broachingmach.com\/fr\/wp-json\/wp\/v2\/media?parent=5354"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/broachingmach.com\/fr\/wp-json\/wp\/v2\/categories?post=5354"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/broachingmach.com\/fr\/wp-json\/wp\/v2\/tags?post=5354"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}